Home   |   About Us   |   Products   |   Services   |   Technology   |   Site Map   |   Contact Us
Bearing Housings
STAMPED HOUSINGS
    flanges   FLANGES
    pillow block set   PILLOW BLOCK SETS
    pillow block stands   PILLOW BLOCK STANDS
    flush mounts   FLUSH MOUNTS
    take-up units   TAKE-UP UNITS
    custom bearings   PARTS MADE TO YOUR PRINTS
    BRONZE BUSHED BEARING ASSEMBLIES
    pillow blocks   PILLOW BLOCKS
    flange side mounts   FLANGE SIDE MOUNTS
    flange mounted   FLANGE MOUNTED
    NEW PRODUCTS
    plastic bearings   PLASTIC BEARINGS
    SPECIAL PRODUCTS
    rubber boots   RUBBER BOOTS
    bronze bushed bearings   BRONZE BUSHINGS &
BRONZE THRUST WASHERS
    bronze bar stock   BRONZE BAR STOCK
         
Two-Bolt Flanges For Standard Ball Bearing Units

We have supplied these flanges as housing units for standard ball bearings made by MRC-Marlin-Rockwell, SKF, Fafnir, Sealmaster, New Departure, Linkbelt, and many others. One housing unit consists of two identical self-aligning flanges. Each pair of flanges has a spherical inside surface which mates with the spherical outer surface of the ball bearing ring to provide self-alignment in any direction.

A minimum of space is required for installation as the unit protrudes thru the frame, plate, or panel on which it is installed.

The flanges listed below are standard and are dimensionally the same as supplied by the leading ball bearing manufacturers.

Two Bolt Flange Mount
Manitou
Stamping
Number 		Shaft
Size 		A B C D E F H J Bolt
Size 		Steady
Radial
Load
Rating 		Fafnir
Equiv.
Part 		SKF
Equiv.
Part 		NTN
Equiv.
Part
35M-2 1/2, 9/16 5/8 35MM 2-5/16 3-3/16 2 1/2 7/32 9/32 1-5/8 .053 1/4 350 35LST    
40M-2 1/2 & 5/8 40MM 2-5/16 3-3/16 2 1/2 9/32 9/32 1-15/16 .075 1/4 600 40MST FT-40 PFL203
40M-2-SS Same as 40M-2 except made from grade 304 stainless steel
42M-2 3/4 42MM 2-19/32 3-9/16 2-13/16 9/32 11/32 1-15/16 .065 5/16 400 42LST    
47M-2 3/4 47MM 2-5/8 3-9/16 2-13/16 5/16 11/32 2-3/16 .083 5/16 700 47MST FT-47 PFL204
47M-2-SS Same as 47M-2 except made from grade 304 stainless steel
52M-2 7/8 to 1 52MM 2-51/64 3 3/4 3 11/32 11/32 2-3/8 .083 5/16 800 52MST FT-52 PFL205
52M-2-SS Same as 52M-2 except made from grade 304 stainless steel
52M-2B 7/8 to 1 52MM 2-51/64 3 3/4 3 13/32 11/32 2-13/32 .134 5/16 1700 52MST3    
62M-2 1-1/16 to 1 1/4 62MM 3-5/16 4-7/16 3-9/16 11/32 13/32 2-13/16 .104 3/8 1100 62MST FT-62 PFL206
62M-2B 1-1/16 to 1 1/4 62MM 3-5/16 4-7/16 3-9/16 13/32 13/32 2-27/32 .134 3/8 1700 62MST2    
72M-2 1 1/4 to 1-7/16 72MM 3-11/16 4-15/16 3-15/16 7/16 13/32 3-3/16 .104 3/8 1400 72MST   PFL207
72M-2B 1 1/4 to 1-7/16 72MM 3-11/16 4-15/16 3-15/16 1/2 13/32 3-3/16 .149 3/8 1400 72MST .149 Thick for Heavy Thrust Load
P.O. Box 10526 • White Bear Lake, MN 55110-0526 • Tel: 651-429-4285 • 1- 800-894-1509 • Fax: 651-429-5765 • Email: info@manitoumfg.com