Pillow Blocks

500 Series Pillow Blocks

btn-3d-download

505 Pillow Blocks

510 Pillow Blocks

515 Pillow Blocks

520 Pillow Block Sets

500 Pillow Blocks500-series-pillowblock-2

These units are self-aligning due to the spherical construction of the inner housing which conforms to a spherical socket formed in the outer housing. The porous bronze bearing has an oil capacity of one-third of its volume. The large oil reservoir with the close fitting wick which surrounds the bearing, provides ample lubrication at all times. The top strap is made of a 12 gauge steel. The base is sprung slightly when the bolts are tightened which insures proper pressure between the inner and outer housing so as to permit free self-alignment and yet maintain the inner housing in correct position. When the pillow block is furnished with a grease fitting, then the bronze bearing is provided with grease outlet. Finished with clear zinc plating for corrosion resistance.

525 Pillow Block Sets

530 Pillow Block Sets

535 Pillow Block Sets

Shaft Size
Oil Cup P/N’s
Oil and Felt Filled Cavity
Grease Zerk P/N’s
Out the Top
Out the Side
Out the Bottom
Out the Top
Out the Side
Out the Bottom
1/2″
500/505-1/2
500/510-1/2
500/515-1/2
500/520-1/2
500/525-1/2
500/530-1/2
500/535-1/2
5/8″
500/505-5/8
500/510-5/8
500/515-5/8
500/520-5/8
500/525-5/8
500/530-5/8
500/535-5/8
3/4″
500/505-3/4
500/510-3/4
500/515-3/4
500/520-3/4
500/525-3/4
500/530-3/4
500/535-3/4
13/16″
500/505-13/16
500/510-13/16
500/515-13/16
500/520-13/16
500/525-13/16
500/530-13/16
500/535-13/16
7/8″
500/505-7/8
500/510-7/8
500/515-7/8
500/520-7/8
500/525-7/8
500/530-7/8
500/535-7/8
15/16″
500/505-15/16
500/510-15/16
500/515-15/16
500/520-15/16
500/525-15/16
500/530-15/16
500/535-15/16
1″
500/505-1
500/510-1
500/515-1
500/520-1
500/525-1
500/530-1
500/535-1

700 Series Heavy Duty Pillow Blocks

 

 

 

 

 

These rugged self-aligning Pillow Blocks were designed for applications where heavy loads and higher speeds are encountered. These units are self-aligning due to the spherical construction of the inner housing which conforms to a spherical socket formed in the outer housing. The base is sprung slightly when the bolts are tightened which insures proper pressure between inner and outer housing so as to permit free self-alignment and yet maintain the inner housing in correct position. The outer housing or top strap is made from 10 gauge steel and the base from 12 gauge. They can be installed either in horizontal or vertical position. Standard units are supplied with threaded grease fittings and the units have large grease reservoirs. Finished with clear zinc plating for corrosion resistance.

 

Part Numbers
Shaft Size 700 Series 730 Series
7/8″ 700-7/8 730-7/8
1″ 700-1 730-1
1-1/16″ 700-1-1/16 730-1-1/16
1-1/8″ 700-1-1/8 730-1-1/8
1-3/16″ 700-1-3/16 730-1-3/16
1-1/4″ 700-1-1/4 730-1-1/4
1-3/8″ 700-1-3/8 730-1-3/8

 

Rubber Grommets

Where the application requires a minimum of vibration and noise proof mounting, oil resisting, static-conductive, neoprene rubber grommets are available. Two grommet sets are required for each pillow block.